Temperature Display; Temperature Range - Miele KFN 12927 SD edt/cs Operating And Installation Instruction

Frost free fridge freezer with perfectfresh zone and dynamic cooling
Hide thumbs Also See for KFN 12927 SD edt/cs:
Table of Contents

Advertisement

Temperature display

The temperature display on the
control panel always shows the
required temperature.

Temperature range

The temperature can be adjusted:
– In the refrigerator section from 3 °C
to 9 °C.
– In the freezer section from -15 °C to
-32 °C.
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.
The correct temperature
The temperature display will flash if a
different temperature is being set.
The required temperature in the freezer
section temperature display will also
flash if
– the temperature in the freezer
section is not within the possible
temperature range which can be
displayed,
– the temperature in the freezer
section has risen by several degrees,
indicating that the appliance is
warming up too much.
The alarm off indicator will flash at the
same time.
This loss of coldness is no cause for
concern in the following circumstances:
– when the door has been left open for
a while, e.g. for removing or storing a
large amount of food,
– when fresh food is being frozen.
However, if the temperature in the
freezer remains above -18 °C for a
long time, check that the frozen food
has not started to defrost. If it has,
check that the food is safe to use
and if it is, then use it as soon as
possible.
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kfn 12927 sd edtKfn 12927 sd cs

Table of Contents