Running A Product Check - Epson XP-600 User Manual

LCD screen message
Recovery mode
Parent topic:
Related references
Where to Get Help
Paper Jam Problems Inside the Product
Paper Jam Problems in the Paper Cassette
Paper Jam Problems in the Auto Duplexer
Related topics
Loading Paper
Placing Originals on the Product

Running a Product Check

Running a product check helps you determine if your product is operating properly.
1. Disconnect any interface cables connected to your product.
2. Load plain paper in the product.
3. Press the
4. Press the arrow buttons to select Setup, then press OK.
Condition/solution
An error has occurred during firmware updating. Connect your product using
a USB cable and try updating the firmware again. If you still receive this error
message, contact Epson for support.
Solving Problems
home button, if necessary.
225