Advertisement
Kamai Hybrid TV Receiver User's Guide
To reduce the risk of electric shock, DO NOT remove cover or back. No user serviceable parts
inside. Refer servicing to qualified personnel.
To help prevent electric shock, plug the power cable into properly grounded sources. Use only
properly grounded extension cords and adaptors, if they are needed.
The AC main plug is used as the disconnect device, the disconnect device shall remain readily
operable.
Make sure nothing is lying on any of the cables.
Be sure the cables are located where they will not be stepped on or tripped over.
Do not spill food or liquids onto the unit.
Do not push any objects into the free slots. Doing so will damage the unit, can cause fire or
electrical shock, and can short out interior components.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not block cooling vents.
Do not place the equipment in a closed-in wall unit.
When you disconnect a cable, pull on its connector or on its strain relief loop, not on the cable itself.
Some cables have a connector with locking tabs; if you are disconnecting this type of cable, press
in on the locking tabs before disconnecting the cables.
When you connect a cable, make sure both connectors are correctly oriented and aligned before
connecting to avoid bending connector pins.
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall
be easily accessible.
Changes or Modifications not expressly approved by the party responsible could void the user's
authority to operate this device.
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Batteries are not for domestic waste. Exhausted batteries must be returned to the business or local
authorities.
7
Copyright
2011 Entone, Inc. All rights reserved.
Advertisement
