Internet Setup Selections When Using The Nintendo Wi-Fi Usb Connector - Nintendo Wii Operation Manual

W i i S e t t i n g s a n d D a t a M a n a g e m e n t

Internet Setup Selections When Using the Nintendo Wi-Fi USB Connector

Before using the following Internet Setup procedure,
ensure that you've installed the Nintendo Wi-Fi USB
Connector Registration Tool software on the PC you're
using with the connector. Consult the manual included
with the Nintendo Wi-Fi USB Connector for more details
on correct installation.
Broadband
Internet line
Step 1 Step 2
Select the Connection Settings Select an open connection indicated
option. by "None".
56
Wired PC + Nintendo
Wii system
router Wi-Fi USB Connector
Step 3 Step 4
After confirming that the Nintendo Select Nintendo Wi-Fi USB
Wi-Fi USB Connector is ready, select Connector.
Wireless Connection.
Step 5 – Wii
After again confirming that the When you see this screen,
Nintendo Wi-Fi USB Connector is continue with setup on the
ready, select the Next option. PC-side described below.
Step 5 – PC
Nintendo Wi-Fi USB
Connector Registration
tool icon
You should see an icon in your Windows XP task bar for the Nintendo Wi-Fi USB
Connector Registration Tool. Double-click on the icon to launch the tool. It should
show all Wii consoles in wireless range, listing each by its Nickname. Select the Wii
that you want to establish a wireless connection for, then click "Grant permission to
connect" from the menu that appears.
Step 6 Step 7
After you've established the Wii Select OK to test the connection.
connection with the PC, you'll see
a Next option appear in the Wii
console's Internet Setup.
Select Next.
If the test succeeds, you've completed
Internet Setup and your Wii is
wirelessly connected. If the test fails,
consult the Troubleshooting section
in this manual.
57