Place Top and Sides on flat surface to thread the (12) Connecting
Bolts into the pre-drilled
holes (as shown in FIGS. 1 and 2).
= Connecting aott
Right Side Panel
Attach Front Brace to Filler Strip (on back side of Front) using (3) 1-1/2" Screws, be sure to
position Brace as shown, cut-out down. Attach the Handle with (2) 4.7mm Bolts to the
Front. Attach the Rubber Bumpers to the Front Brace using (2) #6x5/8" Panhead Screws,
(as shown in FIG. 3). Attach the Front Support to the back side of the Front using
Flathead Screws (as shown in F_G. 3A). Attach the Plastic Tray to the inside of
Front (as shown in FIG. 3) with (4) #8xl/2"
Filler Strip _