Cabinet Assembly - Kenmore 272.98100.491 Sewing machine cabinet Owner's Manual

Sewing machine cabinet
Table of Contents

Advertisement

Understanding How the "ARROW-LOC"
Cam Fastener Works
ARROW
TOWARDS
HOLE IN
EDG
1. Position bolt in
2. Press cam into
3. insert bolt through
4. To lock, rotate cam
pre-drilled hole and
pre-drilled hole until
pre-drilled hole in
until tight, using
turn until tight,
flush with surface,
edge of panel,
allen key provided.
Cabinet Assembly
Place Left Side Panel, Right Side Panel, Back Brace, Back Panel and Front Brace on a flat surface.
Press the 12 Cams into holes provided (as shown in FIG. B). Point arrow on Cam towards hole
Connecting Bolt will enter. Insert (1) Wood Dowel into pre-driiled holes on each end of Back Brace,
Front Brace and Filler Strip (as shown in FIG. C).
Wood Dowel
NOTE:
= Cam
= Connecting
Bolt
Back Brace
_==,,=
O
Back Panel
W_oodDowe_
Front Brace
o
Top Assembly
S
o
°o
o
Filler Strip
o
Front
0
_
Wood Dowel
Page 2
98100-2

Advertisement

Table of Contents
loading

Table of Contents