Blizzard Snowplow 760HD Installation And Owner's Manual page 10

Ft-lbs
Turns Size
min.max
N/A -02 6-7
N/A -03 8-9
2 -04 11-12
2 -05 14-15
1-1/2 -06 18-20
1-1/2 -08 36-39
1-1/2 -10 57-63
1-1/4 -12 79-88
1 -14 94-103
1 -16 108-113
1 -20 127-133
1 -24 158-167
1 -32 245-258
Ft-lbs
Size Assembly Steps
min.max
-02 6-7 1. Verify the port, o-ring, sealing surfaces and threads are clean and free of damage.
2. Lubricate the threads and the o-ring with 10W hydraulic oil.
-03 8-10
3. For an adjustable O.R.B., completely back off the lock nut and washer.
-04 13-15
4. Hand tighten the fitting until it contacts the port spotface. Point the elbow or tee in the desired direction
-05 17-21
and hold.
-06 22-25 5. Torque to specification.
-08 40-43
NOTE: Torque values specified are for threads lubricated with 10W hydraulic oil.
-10 43-57
-12 68-75
-14 90-99
-16 112-123
-20 146-200
-24 154-215
-32 218-290
April 1, 2006
TORQUE SPECIFICATIONS
37° JIC Flare Torque Values
Assembly Steps
1. Make sure the tubing and threads are clean.
2. Lubricate the threads with 10W hydraulic oil.
3. Hand tighten the nut/sleeve to approx. 30 in-lbs.
4. Make alignment marks on the nut and fitting.
5. Tighten to turn or torque specification.
6. When fully tightened, make a 2
NOTE: Torque values specified are for threads lubricated with 10W hydraulic oil.
Over tightening will reduce the clamping force resulting in loss of seal and reduction of flow.
O-Ring Boss Torque Values
nd
set of alignment marks at the fully tighten positioned.
10 Lit. No. B64090, Rev. 00