Measuring Distance
To measure distance between two points:
1. Press MENU > Measure Distance. An on-
screen arrow appears on the map at your
current location with REF below it.
2. Move the arrow to the reference point (the
starting point you want to measure from),
and press ENTER. A push pin icon marks the
starting point on the map.
3. Move the arrow to the point you want to
measure to. The distance between the two
points is shown in the upper-right corner.
Push pn
ndcatng the
begnnng
pont of the
measurement
GPSMAP 76Cx Owner's Manual
Compass Page
The Compass page guides you to your destination
with a graphic compass and a bearing or course
pointer.
Bearng
Ponter
Measured
dstance
The rotating compass ring indicates the direction
End pont of
you are heading. The bearing and course pointers
measurement
labeled REF
indicate the direction (bearing to or course of travel)
to your destination, relative to your current heading
direction. Choose a bearing pointer or course pointer
for guidance.
The Compass
Rng moves to
ndcate North
Orentaton.
Compass Page
M
p
aIn
aGeS