Table of Contents
Advertisement
If you prefer to set the boot priority for long-term use, you should select the
Boot submenu.
1
Turn on your computer and insert the first system recovery disc into the
optical disc drive. Restart your computer.
2
During startup when the Acer logo shows, press the F2 key to enter BIOS
Setup, where you can set system parameters.
3
Use the left and right arrow keys to select the Boot submenu.
4
Use the up and down arrow keys to select the IDE CD device.
5
Use the F6 key to move the IDE CD device to the highest boot priority, or
use the F5 key to move other devices to a lower boot priority. Ensure that
the IDE CD device is the highest priority.
6
Press the ESC key to enter the Exit submenu, press the ENTER key to Exit
Saving Changes. Press the ENTER key again to select Yes. The system will
reboot.
7
When you reboot, Windows will be installed from the recovery disc.
8
Insert the second recovery disc when prompted, then follow the onscreen
prompts to complete the restore.
9
Remove the recovery disc from the optical drive once the restore is
complete. Do this before rebooting your computer.
16
Advertisement
Table of Contents
