Play From An External Device; Product Information; Specifications - Philips DCB852 User Manual

6
Press SLEEP/TIMER to confirm.
» The minute digits begin to blink.
7
Press / to set the minute.
» The timer is set and activated.
is displayed.
»
Activate and deactivate the alarm
timer
1
Switch the system to standby mode.
2
Press TIMER repeatedly to activate or
deactivate the timer.
» If the timer is activated,
» If the timer is deactivated,
disappears on the display.
Note
•
If DISC/USB/iPod source is selected and the track
cannot be played, tuner is activated automatically.

Play from an external device

You can also listen to an external audio device
through this unit.
1
Press USB/MP3 LINK to select the MP3
link source.
2
Connect the supplied MP3 link cable to:
• the MP3 LINK jack (3.5mm) on the
unit.
• the headphone jack on an external
device.
3
Start to play the device (see the device
user manual).
9 Product
•
Product information is subject to change without prior
notice.

Specifications

is displayed.
Amplifier
Rated Output Power
Frequency Response
Signal to Noise Ratio
Aux Input
Disc
Laser Type
Disc Diameter
Support Disc
Audio DAC
Total Harmonic
Distortion
Frequency Response
S/N Ratio
Tuner
Tuning Range
Tuning grid
DAB sensitivity
- EN50248
Total Harmonic
Distortion
information
Note
2X15W RMS
60 Hz - 16 kHz, ±3 dB
>65dBA
0.5 V RMS 20kohm
Semiconductor
12cm/8cm
CD-DA, CD-R, CD-RW,
MP3-CD
24Bits / 44.1kHz
60Hz -16kHz (44.1kHz)
>65dBA
FM: 87.5 - 108 MHz;
DAB: 174.92-239.20 MHz
50 KHz
<-95 dbm
<2%
<1%
EN
21