Reset To Factory Setting - Philips DCB852 User Manual

Tip
•
You can press MODE/SCAN to tune to the next
station with strong reception automatically.
Program radio stations automatically
You can program a maximum of 30 preset
radio stations (FM).
In the tuner mode, press and hold
MODE/SCAN to activate automatic program
mode.
» All available stations are programmed.
» The first programmed radio station is
broadcast automatically.
Program radio stations manually
Note
•
You can program a maximum of 30 preset radio
stations.
1
Tune to a radio station.
2
Press PROG to activate program mode.
3
Press / to allocate a number (1 to 30)
to this radio station, then press PROG to
confirm.
» The preset number and the frequency
of the preset station are displayed.
4
Repeat the previous steps to program
other stations.
Note
•
To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press /
number.
to select a preset
Tip
•
Position the antenna as far as possible from TV, VCR, or
other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antenna.
FM stations with RDS
Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
If you listen to a FM station with RDS signal,
"RDS" displays.
Display RDS information
1
Tune to the desired RDS radio station on
the FM waveband.
2
Press RDS/DISPLAY on the remote
control repeatedly to switch through the
following information (if available):
• Radio text message
• Program type (for example: News,
Sport...)
• Frequency
• Stereo/Mono Mode
• Time
• Date
Note
•
[NO Radio Text], [NO PTY], [NO Name], [Mono],
[00:00:00] or [0-0-0000] displays if no RDS signal is
available.

Reset to factory setting

1
In DAB/FM mode, press MENU to enter
the menu options.
2
repeatedly until [System]
Press /
displays on the display panel.
3
Press to access the system menu.
» [Factory Reset] displays.
EN
19