Timer Feature (Kitchen Timer/Stand Time/Delay Start) - Panasonic Inverter NN-CF770M Operating Instructions Manual

This feature allows you to program the oven as a kitchen
timer. It can also be used to program a standing time
after cooking is completed and/or to program a delay
start.
To Use as a Kitchen Timer:
Example: To count down 5 minutes.
1.
• Press Timer/Clock button once.
2.
• Set 5 minutes using Time dial.
Time Dial
(up to 1 hour and 30 minutes).
Rotate
3.
• Press Start button.
Time will count down without oven
operating.
To Set Stand Time:
Example: To cook at MEDIUM power for 3 minutes,
with stand time of 5 minutes.
1.
• Press 3 times.
(see page 18 for directions).
Press 3 times
2.
Set 3 minutes using Time dial.
Time Dial
Rotate
3.
• Press Timer/Clock button once.
4.
• Set 5 minutes using Time dial
Time Dial
(up to 1 hour and 30 minutes).
Rotate
5.
• Press Start button.
Cooking will start. After cooking,
stand time will count down without
oven operating.
IP3153_39M80CP_Eng_22_100908.indd 28 IP3153_39M80CP_Eng_22_100908.indd 28
Timer Feature
CAUTION:
If oven lamp is lit while using the timer feature,
the oven is incorrectly programmed. Stop oven
immediately and re-read instructions.
To Set Delay Start:
Example: To delay the start of cooking for 5 minutes,
and cook at MEDIUM power for 3 minutes.
1.
2.
Time Dial
Rotate
3.
Press 3 times
4.
Time Dial
Rotate
5.
Notes:
1. When each stage finishes, a two-beep signal sounds.
At the end of the program, the oven will beep five
times.
2. If the oven door is opened during Stand Time, Kitchen
Timer or Delay Time, the time on the display will
continue to count down.
3. Stand time and Delay start cannot be programmed
before any automatic Function. This is to prevent
the starting temperature of food from rising before
defrosting or cooking begins. A change in starting
temperature could cause inaccurate results.
28
• Press Timer/Clock button once.
• Set 5 minutes using Time dial.
(up to 1 hour and 30 minutes).
• Press 3 times.
(see page 18 for directions).
Set 3 minutes using Time dial.
• Press Start button.
Delay time will count down. Then
cooking will start.
2010-9-8 9:48:19 2010-9-8 9:48:19