Resetting The Default Cmos Values - ECS HDC-I2 Manual

22
Press the delete key to access BIOS Setup Utility.
Main Advanced Chipset Frequency/Voltage Control Boot Security Save & Exit
BIOS Information
System Laguage
System Date
System Time

Resetting the Default CMOS Values

When powering on for the first time, the POST screen may show a "CMOS
Settings Wrong" message. This standard message will appear following a clear
CMOS data at factory by the manufacturer. You simply need to Load Default
Settings to reset the default CMOS values.
Note: Changes to system hardware such as different CPU, memories, etc. may also
trigger this message.
Using BIOS
When you start the Setup Utility, the main menu appears. The main menu of the
Setup Utility displays a list of the options that are available. A highlight indicates
which option is currently selected. Use the cursor arrow keys to move the highlight
to other options. When an option is highlighted, execute the option by pressing
<Enter>.
Some options lead to pop-up dialog boxes that prompt you to verify that you wish to
execute that option. Other options lead to dialog boxes that prompt you for infor-
mation.
Some options (marked with a triangle
the values for the option. Use the cursor arrow keys to scroll through the items in the
submenu.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
[English]
[Sat 12/18/2010]
[23:51:29]
Version 2.10.1208. Copyright (C) 2010, American Megatrends, Inc.
Using BIOS
Choose the system default
laguage.
Enter : Select
+/- :Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
) lead to submenus that enable you to change
:Select Screen
:Select Item