FujiFilm Finepix XP200 Series Owner's Manual page 14

Product Features and Precautions for Use
■ ■ After Use
After Use
Perform the following steps after using the camera underwater or in locations where foreign
matter might adhere to the camera body.
1
Securely close the battery-chamber cover and rinse the camera
under the tap or leave it in a basin of fresh water for about ten
minutes.
2 Remove water from the camera with a soft, dry cloth and leave it to dry in a well-ventilated
location in the shade.
3 After confirming that the camera has dried and is free of water droplets, open the battery-
chamber cover and use a soft, dry cloth to remove any water, dust, or other foreign matter
from the battery chamber.
Q Remove any foreign matter from the water-resistant seal and adjacent surfaces. Foreign
matter could damage the seal, lowering water resistance.
Q Liquid soaps, detergents, alcohol, and other cleansers may affect water resistance and should
never be used.
Q After use, remove water droplets and foreign matter with a dry cloth, firmly latch the battery-
chamber cover, and soak the camera in fresh water for about ten minutes. Dry the camera
thoroughly after removing it from the water.
xiv