Advertisement
SPEAKER OUTPUTS – The SHUTTLE 6.0® provides two Neutrik Speak-On™ connectors (wired 1+/1-). The
speaker jacks are paralleled. The minimum speaker load is 4 ohms. Do not ground either the "+" or the "-" outputs.
POWER INPUT – VOLTAGE SELECTOR SWITCH - The SHUTTLE 6.0® utilizes rear panel switch selectable
universal power supply that operates from 100V to 240 volts, 50 to 60 Hz for world wide use. Simply set the switch
to the appropriate AC mains voltage (BEFORE connecting to the power source), and utilize the proper IEC cord-set
appropriate for the country the product is being used.
For countries using 100V, 110V, 115V and 120V AC mains, select the 115V switch position on the Voltage Selector
switch.
For countries using 220V, 230V, and 240V AC mains, select the 230V switch position on the Voltage Selector switch.
There is no externally accessible AC mains (line) fuse, the internal fuse is integral to the SMPS power supply and is
not user serviceable. This fuse will not fail except under very unlikely fault conditions to the SMPS, and if this occurs
a qualified service technician is required to correct the problem.
CHASSIS DESIGN – The SHUTTLE 6.0®'s ULTRA LIGHT DESIGN utilizes the highest quality aircraft grade, com-
puter machined aluminum chassis. To clean the amplifier, nothing more than a damp cloth and a little bit of glass
cleaner (like Windex™) should be used.
RACK MOUNTING – The SHUTTLE 6.0® is designed to be rack mounted in a standard EIA style 19" equipment
rack or tour-case. Optional rack mounting kit is available from your dealer.
GIG-BAG – A custom padded carry bag with shoulder strap is available as an optional accessory from your dealer.
This padded bag is ideal for convenient carrying of the amplifier. Do not operate the amplifier inside the carry bag, as
the chassis aluminum construction and cooling fan inlet vents are part of the amplifier's cooling mechanism.
COMBO VERSIONS - REMOVABLE CHASSIS FEATURE—A unique element of the SHUTTLE 6.0® combo
models is the ability to easily remove the amp "head" from its protective "saddle" and use the Shuttle amp with larger
enclosures for bigger venues.
Removal of the chassis is simple. We recommend first unplugging the speaker cable from the back of the chassis.
Step One:
•Unscrew the large
thumbscrews on both sides
of the chassis' saddle.
•It is recommended to
screw these back into the
chassis after the amp is
removed, so as not to loose
them.
Step Two:
•After the thumbscrews are
removed, gently slide the
chassis forward using both
hands to move it forward in
the saddle.
5
Step Three:
•As the chassis appears
from within the saddle, grab
it from the front end and
remove it completely from
the protective saddle.
Advertisement
