Caring For The Gpsmap 276C; Cleaning The Case; Water Immersion; Cleaning The Screen - Garmin GPSMAP 276C Owner's Manual

I > c
ntroductIon ArIng for the

Caring for the GPSMAP 276C

The GPSMAP 276C case is constructed of high quality materials
and does not require user maintenance except cleaning.

Cleaning the Case

Clean the unit's outer casing (except for the screen) using a cloth
dampened with a mild detergent solution and then wipe dry.
Avoid chemical cleaners and solvents that might damage plastic
components.

Cleaning the Screen

The GPSMAP 276C screen should be cleaned using a soft, clean,
lint-free cloth. Water, isopropyl alcohol, or eyeglass cleaner can be
used if needed. If these are used, apply the liquid to the cloth and
then gently wipe the screen with the moistened cloth.
v
gPsMAP 276c
Storage
Do not store the GPSMAP 276C where prolonged exposure to
temperature extremes might occur (such as in the trunk of a car)
as permanent damage could result. User information, such as
waypoints and routes are retained in the unit's memory without
the need for external power. It is always a good practice to back up
important user data by manually recording it or downloading it to a
computer (transferring it to MapSource).

Water Immersion

The GPSMAP 276C is waterproof to IEC Standard 60529 IPX7.
It can withstand immersion in 1 meter of water for 30 minutes.
Prolonged submersion can cause damage to the unit. After
submersion, be certain to wipe and air dry the unit before reuse or
charging.
GPSMAP 276C Owner's Manual