Table of Contents
Advertisement
Manually Configuring your Router
Internet WAN
The "Internet WAN" tab is where you will set up your Router to connect to your
Internet Service Provider (ISP). The Router is capable of connecting to virtually
any ADSL Service Provider's system provided you have correctly configured the
Router's settings for your ISP's connection type. Your connection settings are
provided to you by your ISP.
To configure the Router with the settings that your ISP gave you, click
"Connection Type" (1) on the left side of the screen. Select the connection type
you use. If your ISP gave you DNS settings, clicking "DNS" (2) allows you to
enter DNS address entries for ISPs that require specific settings. When you have
finished making settings, the "Internet Status" indicator will read "Connected" if
your Router is set up properly.
Connection Type
From the "Connection Type" page, you can select one of these five
connection types based on the instruction provided by your ISP:
PPPoE
PPPoA
Dynamic IP (1483 Bridged)
Static IP (IPoA)
Modem Only (Disable Internet Sharing)
Note: If you are not sure which connection type to select, please contact your ISP.
Select the type of connection you use by clicking the radio button next to your
connection type and then clicking "Next".
17
17
1
2
3
4
5
6
7
8
9
10
11
11
Advertisement
Table of Contents
