Table of Contents
Advertisement
Firmware-Upgrade Guide
The file upload is finished when the progress bar runs through 100 percent and a
prompt tells you that the upgrade is OK.
Click "OK". The firmware-upgrade process is complete.
Step 9.
Finally, unplug the power cable from the back of the KVM Switch and all other
cables from the KVM Switch, and perform a cold reset. Reconnect all the cables
again to the KVM Switch.
Now you can enjoy the newly added functionality and compatibility of the new
firmware version.
Note: After you have finished the firmware-upgrade process, try the port switching
and other functionalities of the KVM Switch to see whether it works fine with the
new firmware. If it does, then this upgrade process was successfully completed.
Congratulations!
If the file-upload process encounters an error and cannot complete successfully,
please refer to the "Firmware-Upgrade Troubleshooting" section.
23
Advertisement
Table of Contents
Troubleshooting
