Remote Control - Panasonic CS-S18NKUA Operating Instructions Manual

Press and hold for 5 seconds to dim or restore the
8
unit's indicator brightness.
Press and hold for approximately 10 seconds to
9
show temperature setting in °C or °F.
Press and hold for approximately 5 seconds to show
10
12-hour (am/pm) or 24-hour time indication.
Press to restore the remote control's default setting.
11
Not used in normal operations.
12
NOTES NOTES
QUIET POWERFUL
,
• Can be activated in all modes and can be cancelled by
pressing the respective button again.
QUIET POWERFUL
,
• Cannot be selected at the same time.
TO SET THE TIMER TO SET THE TIMER
• To turn ON or OFF the unit at a preset time.
ON
1
OFF
Select ON or
Set the time
OFF timer
• To cancel ON or OFF timer, press
press .
CANCEL
• When ON Timer is set, the unit may start earlier (up
to 15 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation
on the back cover.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
SET
resumed) by pressing
2
SET
Confi rm
ON
or then
OFF
.
5