Garmin GPS 155XL Pilot's Manual & Reference page 94

SECTION
APPROACH NAV
5
Missed Approach
Select the waypoint to which you have been given
clearance on the active route page and press D.
Confirm the starting waypoint for the next
attempt by pressing E.
84
If you're not authorized to fly direct-to the missed approach holding point:
1. After the MAP has been crossed, press the
display the first waypoint of the missed approach procedure as the next approach waypoint.
E
2. Press to confirm the destination.
3. Stop automatic waypoint sequencing by setting the GPS SEQ switch to the HOLD position.
4. Fly the missed approach procedure. Remember to select the desired inbound course to the
missed approach holding point before setting the GPS SEQ switch to the AUTO position.
5. Set the GPS SEQ switch to the AUTO position for navigation to the missed approach
holding point.
After a missed approach, the GPS 155XL will allow you to repeat the same
approach procedure and select the approach waypoint to which you have been
cleared as the next active to waypoint. Before reactivating the approach, make sure
you fly all published missed approach procedures.
To reactivate the same approach for another attempt:
R
1. Press the key and rotate
C O
2. Press and rotate
to which you have been given clearance.
D
3. Press the key, followed by
repeat approach, starting with the approach waypoint you have selected.
D
key. The GPS 155XL will automatically
O
to select the active route page.
to place the cursor over the identifier of the approach waypoint
E
. The GPS 155XL will provide navigation for the