Garmin GPS 155XL Pilot's Manual & Reference page 122

APPENDIX
SIMULATOR
C
Database confirmation page
Entering an initial position reference.
112
To enter an initial position reference by waypoint identifier:
O
1. Rotate to highlight the waypoint identifier field.
K O
2. Use and to spell out the identifier of the desired airport, navaid or user waypoint.
E
3. Press to confirm the identifier. The waypoint confirmation page will appear, display-
ing the waypoint's position.
E
4. Press to confirm the 'ok?' prompt.
The position page will now appear, and you may now use most of the GPS 155XL
navigation features for practice and planning. You'll also receive a 'Do not use for nav'
message to remind you that the simulator mode should never be used for actual navi-
gation. During simulator operation, you will be able to enter a ground speed from the
NAV summary page, and define a course to a destination from the direct-to confirma-
tion page. Altitude may only be entered by using the VNAV function available from
the NAV menu 1 page (see page 25).
To enter a ground speed from the NAV summary page:
N O
1. Press and rotate
C
2. Press to activate the cursor.
O
3. Rotate to highlight the ground speed field.
K O
4. Use and to enter the desired speed. Press
To exit the simulator mode, the GPS 155XL must be turned off by rotating the B
knob counterclockwise until the unit shuts down. All waypoints and routes created in
simulator mode will be retained in the GPS 155XL' s internal memory.
to display the NAV summary page.
E
to accept, and
C
to finish.