Muting The Radio; Radio Settings - Garmin Rino 650 Owner's Manual

Radio
voice signals. This is helpful if a signal
is going out of range.
Select Radio > Monitor.

Muting the Radio

1. Select .
2. Select Volume.

Radio Settings

Select Radio >
• Send Location—enables you to
send your current location after
each transmission
• Allow Polling—enables polling.
Polling allows another Rino user to
get your location by sending a poll
request.
• Power Level—adjusts power level
on frequencies.
6
> Setup Radio.
(page 8).
• Squelch tone Mode:
◦ CtCSS—Continuous Tone
Controlled Squelch System
allows you to ignore unwanted
calls from persons using the
same channel.
◦ DCS—Digital-Coded Squelch
allows you to ignore unwanted
calls from persons using the
same channel.
• Repeater Channel—Enables the
CBRS/PRS repeater channels.
• Headset type—allows you to
select the type of headset you are
using. To purchase accessories, go
to http://buy.garmin.com
your Garmin dealer.
• Vox Level—Voice operated
transmission controls the sensitivity
level of any Vox accessory.
or contact
Rino 650 Owner's Manual