Stitch Width Dial 1:16; Needle Position Dial 1:16 - Pfaff 1529 Owner's Manual

1:16 Operate your Pfaff select
Stitch width dial
The stitch width can be adjusted with this
dial (27). When selecting the width, the
needle must not be in the material.
Basic setting: Turn the stitch width knob
27
(27) to the symbol (maximum stitch
width).
Exception: Straight stitch is sewn with
stitch width 0.
In chapter "2. Utility stitches and practical
sewing", you will nd recommendations
in the tables for the stitch width selection
of individual stitches. During sewing you
can also change the stitch width.
Needle position dial
In the center needle position
, 14 additional needle positions can be
selected by turning the needle positioning
dial (28) in increments to the left or right.
The furthest needle position to the left
28
can be achieved by turning the dial
(28) as far as it will go to the right. The
furthest needle position to the right
can be achieved by turning the dial as far
as it will go the left. When the position of
the needle is being changed, the needle
must not be in the material.
Note: If you have selected the right needle
position, you can now use the width dial (27)
to increase or reduce the width of the left side
of the stitch. The reverse applies also for needle
position to the left.
1:16