Daikin FTXN15KVJU Operation Manual page 11

Turn the breaker on
• After the power is turned on, the louvers of the indoor unit open and close once to set
the reference position.
Checks on remote controller settings
• This remote controller is common to the heat pump model and
cooling only model. Use the DIP switch on the remote
controller to set the heat pump model or cooling only model.
• Refer to the following explanation and make the setting as
shown in the illustration.
• For customers of heat pump model: Set to H/P
• For customers of cooling only model: Set to C/O
To set the clock
1.
Press .
2.
Press to set the current day of the week.
3.
Press .
4.
Press to set the clock to the present time.
• Holding down or
5.
Press .
• Point the remote controller at the indoor unit when pressing the buttons.
" " is displayed.
" " and " " blink.
" " blinks.
rapidly increases or decreases the time display.
" " blinks.
DIP switch
H/P C/O
10