Timer Operation - Daikin FTX20GV1B Operation Manual

TIMER Operation

Timer functions are useful for automatically switching the air
conditioner on or off at night or in the morning. You can also
use OFF TIMER and ON TIMER in combination.
■ To use OFF TIMER
operation
• Check that the clock is correct.
If not, set the clock to the present time.
(page 9.)
1. Press "OFF TIMER button".
is displayed.
blinks.
2. Press "TIMER Setting button"
until the time setting reaches the
point you like.
• Every pressing of either button increases or
decreases the time setting by 10 minutes.
Holding down either button changes the set-
ting rapidly.
3. Press "OFF TIMER button" again.
• The TIMER lamp lights up.
■ To cancel the OFF TIMER operation
4. Press "CANCEL button".
• The TIMER lamp goes off.
NOTE
• When TIMER is set, the present time is not displayed.
• Once you set ON, OFF TIMER, the time setting is kept in the memory. (The memory is canceled when
remote controller batteries are replaced.)
• When operating the unit via the ON/OFF Timer, the actual length of operation may vary from the time
entered by the user.
■ NIGHT SET MODE
When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.5°C
up in COOL, 2.0°C down in HEAT) to prevent excessive cooling (heating) for your pleasant sleep.
16
ECONO
ON/OFF
TEMP
POWERFUL
MODE FAN SWING
COMFORT
ON CANCEL
OFF
TIMER
2
4
1, 3