Preparation Before Operation - Daikin FTXD50BVMA Operation Manual
Room air conditioner
Hide thumbs
Also See for FTXD50BVMA:
- Service manual (298 pages) ,
- Pocket manual (169 pages) ,
- Service manual (210 pages)
Table of Contents
Advertisement
Preparation Before Operation
I To set the batteries
1. Press
front cover to take it off.
2. Set two dry batteries (AAA).
3. Set the front cover as before.
ATTENTION
I I I I About batteries
• When replacing the batteries, use batteries of the same type, and replace the two old batteries
together.
• When the system is not used for a long time, take the batteries out.
• We recommend replacing once a year, although if the remote controller display begins to fade or if
reception deteriorates, please replace with new alkali batteries. Using manganese batteries reduces
the lifespan.
• The attached batteries are provided for the initial use of the system.
The usable period of the batteries may be short depending on the manufactured date of the air
conditioner.
with a finger and slide the
Position + and
– correctly!
2
3
1
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the FTXD50BVMA and is the answer not in the manual?
Questions and answers
On light comes on wall unit that’s all New batteries in remote Same with both remotes as we have two
The light on the Daikin FTXD50BVMA wall unit may be on even with new batteries in both remotes due to a malfunction in the indoor/outdoor unit communication or a PCB issue. Possible causes include:
- Wrong models interconnected (indoor and outdoor units not compatible)
- Defective indoor or outdoor unit PCB
- Incorrect PCB mounted in the indoor or outdoor unit
- Signal blockage between remote and indoor unit
Check if the remote is aimed directly at the unit with no obstructions. If the issue persists, further diagnosis of unit wiring or PCB may be needed.
This answer is automatically generated