Troubleshooting - Samsung MX-FS8000 User Manual

Troubleshooting
Refer to the chart below when this product does not function properly. If the problem you are
experiencing is not listed below or if the instruction below does not help, turn off the product,
disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service
Center.
Symp_0m
I cannot eject the disc.
Playback does not start
immediately when the
Play/Pause button is pressed.
Sound is not produced.
The remote control does not
work.
• The product is not working.
(Example: The power goes out or
the front panel key doesn't work
or you hear a strange noise.)
• The product is not working
normally.
Isthe power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
• No sound is heard during fast playback, slow playback, and step
motion playback.
Are the speakers connected properly? Isthe speaker setup correctly
customized?
• Isthe disc severely damaged?
• Isthe remote control being operated within its operational angle and
distance range?
• Are the batteries drained?
• Run the resetfunction. With the "NO DISC" messageon the displayof
the product and no disc inthe disc slot, press and hold the STOP (l)
button on the product for more than 5 seconds.
Using the RESETfunction will erase allstored settings.
Do not use this unless necessary.
Can't receive radio broadcast. • Is the antenna connected properly?
• if the antenna's input signal is weak, installan external FM antenna in an
area with good reception.
Turn off automatically after • Check the power in use is within the rangeof the power which specified
displaying "PROTECT" on the rearlabel of the product.
• if "VoltageSelector" is on the rear panel, check the power is same with
the voltage that you set manually.
18 English