Road And Area Avoidance - Garmin cf Que 1620 Application Manual

Que
™
cf 1620
GPS Applications
Routes
Avoid Roads and Areas Page
Tap "Measure from
Pointer" icon - Tap Start
Point on Map and drag
to End Point
Road Section to Avoid Defi ned
Area to avoid defi ned by the stylus
Avoid Areas Selection Page

Road and Area Avoidance

You can select specific sections of roads and define areas to avoid when calculating
a route. This helps you to avoid road construction, heavy traffic areas, etc.
To select types of roads to avoid:
1. Tap the desired type(s) of roads you wish to avoid when calculating a
route to place a check in the adjacent box. You can choose from High
ways, Toll Roads, U-Turns and Unpaved Roads.
2. To unselect a road tap the road type to remove the check mark.
To select specific sections of roads to avoid:
1. Tap the Add Road button to display Avoid Roads Setup Page.
2. Select a Start Point by using your current location or tap the "Measure
From Pointer" icon to place a start point on a selected road.
3. To determine the end point of the section of road to avoided, drag the
stylus to the desired location on the map.
4. Tap the OK button to display the road section on the map.
5. Tap OK to place it on the Avoid Roads list. Tap the box next to any item
on the list to place an "active" check in the box.
6. Tap and hold the stylus on a selected Avoid Roads item to View, Edit or
Delete.
To select areas to avoid:
1. Tap the Add Area button to display the Avoid Areas Setup Page. The
page will display a map with your current location centered on the map.
2. Use the Drag and Zoom tool zoom in on the area you want to avoid,
or use the Pan Map tool to move to the area on the map.
3. Use the Draw Box tool from the Tool Bar to defi ne the area you want
to avoid.
4. Then tap the OK button and display the Avoid Area Detail Page where
you can rename it and set an expiration date.
5. Tap OK to place it on the Avoid Area list. Tap the box adjacent to any
item on the list to place an "active" check in the box.
6. Tap and hold the stylus on a selected Avoid Areas item to View, Edit or
Delete.
Center Current Location on the Map
Drag Stylus to Pan the Map
Drag to Zoom In on an Area
Drag the Stylus to Defi ne the Area to Avoid
Tap the View/Edit Option to display
the Selected Area to Avoid Page
-25-
View Selected Area to Avoid Page