General Power Tool Safety Warnings Read all safety warnings and all instructions. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE Work area safety power tool. Do not use a power tool while you are tired or under the influence of drugs, Keep work area clean and well lit.
Page 3
Disconnect the plug from the power source Keep cutting tools sharp and clean. and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Use the power tool, accessories and tool bits etc. in accordance with these instructions, Store idle power tools out of the reach of taking into account the working conditions children and do not allow persons unfamiliar...
Additional Safety Warnings Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, Do not use AC only rated tools with a DC birth defects or other reproductive harm. power supply. Some examples of these chemicals are: Keep handles dry, clean and free from oil and grease.
Page 5
Symbols IMPORTANT: Symbol Name Designation/Explanation...
Functional Description and Specifications Disconnect the plug from the power source before making any assembly, adjustments or changing accessories Screwguns NOTE:...
Page 8
Assembly REPLACING BIT TIPS AND BIT TIP HOLDERS MOUNTING THE AUTO-FEED ATTACHMENT INSERTING A SCREW STRIP Disconnect the plug from the power source and/or battery pack from power tool before making any adjustments, changing accessories, or storing power tools.
General Operating Instructions VARIABLE SPEED CONTROLLED TRIGGER SWITCH REVERSING SWITCH LEVER "LOCK-ON" BUTTON If the “Lock-ON” button is BELT CLIP continuously being de- pressed, the trigger can not be released. PRESSURE CONTROLLED CLUTCH SG250/SG450 Operating Instructions DEPTH CONTROL CAPACITIES DEPTH ADjUSTMENT...
SG450AF Operating Instructions AUTO-FEED ATTACHMENT Never place any part of your body in a pinch point area. DRIVING SCREWS ADjUSTING FOR SCREW LENGTH DEPTH ADjUSTMENT CAPACITIES Tool Tips...
Maintenance Service BEARINGS Preventive maintenance performed by unauth- orized personnel may result in misplacing of internal wires and components which could cause serious hazard. Cleaning To avoid accidents always disconnect the tool from the power supply before cleaning or TOOL LUBRICATION performing any maintenance.