Table of Contents
Advertisement
Note:
¡Make sure to select
when no rear view camera is
Off
connected.
¡The image from the rear view camera may be blurred
in the night or a dark place.
RGB Input
(RGB input selection)
RGB1/2
: Select one between RGB1 and RGB2
with which images are displayed most
regularly when a car navigation system
is connected via RGB connector.
Other
Other settings
(Setting ACC selection ON and
ACC Select
OFF)
On
: sets to ON if your car has ACC position.
Off
: sets to OFF if your car has no ACC posi-
tion.
Note:
¡For an ACC-equipped car, select ON. The following
functions are available.
¡The power is turned on automatically when inserting
a disc.
¡
selection disables turning on the power of the
Off
main unit through the remote control.
Caution
¡Be sure to select off when your car has no ACC
position in the ignition switch. Failure to do this
could cause the battery to go dead.
Security Alarm
(Security Alarm)
On
: activates the security alarm.
(a
page 31)
Off
: inactivates the security alarm.
OSD Color
Blue
Green
Red
Memory Clear
Memory clearance
The state of all of the current memories are returned to
default settings.
default:
RGB1
Note:
¡The ID code is not deleted by executing memory clear.
Yes
No
default:
On
OK
Cancel
Note:
¡The power of this unit is turned off automatically after
OK
Please turn on the power again to using this unit.
Caution
¡Be aware that this setting restores the unit to default
settings, so that all the memories and settings that
you have set will be eliminated.
default:
On
(OSD color setting)
: Blue-based screen
: Green-based screen
: Red-based screen
: clears the memory to default settings
: no memory clear.
The display returns to the previous one.
Really?
is selected.
Yes
: proceed.
: no memory clear.
is selected. (memory clearance completed).
34
default:
Blue
appears when
35
CQ-VX220W
Advertisement
Table of Contents
