Table of Contents
Advertisement
General Operations (continued)
Operations
Volume
Note:
¡The sound level for
each source is
stored in memory.
Mute
Tilt Angle
1
5
Folding Down the
Display Temporarily
–
w
q
Setting range: 0 to 40, default: 18
Note:
¡ The volume level can be set independently for each source and each
disc format.
–
[MUTE]
[TILT]
–
or
–
–
–
Warning
¡Do not touch the unit while the display is moving. Inserting hands, fingers or for-
eign objects into the unit can cause injuries and damage to the unit.
Note:
¡ Vertical angle (TILT) is saved in the memory, so when the display is drawn out next, it
is automatically set at the angle and in the position adjusted before.
¡ After adjusting its angle, also adjust the brightness as well. (
¡ The car model and installation conditions may impose some restrictions on the
adjustment of the monitor's angle.
[TILT]
–
Note:
¡Even when the unit power is off, you can fold down the display te mporarily.
Caution
¡Avoid physical shock to the monitor.
¡Do not place any object on the display, or subject it to undue force.
¡Do not move the display forcibly.
¡The monitor movable range may be limited by the type of car, the position where
the display is mounted, etc.
q Up
q [ + ]
w Down
w [ – ]
Mutes the sound.
[MUTE]
To cancel, press again.
q Press and hold for more than 2 sec-
–
onds.
w Touch to adjust.
–
the monitor is opened automatically when
–
turning ON ACC.
the monitor is not opened automatically.
–
a
To raise the display, press again.
–
14
Setting range: 1 to 5
default: 5
default:
Manual
page 36)
15
CQ-VX220W
Advertisement
Table of Contents
