Chapter 19 Log Screens
19.6 Technical Reference
This section provides some technical background information about the topics
covered in this chapter.
19.6.1 Example Log Messages
This section provides descriptions of some example log messages.
Table 75 System Maintenance Logs
LOG MESSAGE
Time calibration is
successful
Time calibration failed
DHCP client gets %s
DHCP client IP expired
DHCP server assigns %s
SMT Login Successfully
SMT Login Fail
WEB Login Successfully
WEB Login Fail
TELNET Login
Successfully
TELNET Login Fail
FTP Login Successfully
FTP Login Fail
Table 76 ICMP Notes
TYPE
0
3
4
232
DESCRIPTION
The NWA has adjusted its time based on information from
the time server.
The NWA failed to get information from the time server.
A DHCP client got a new IP address from the DHCP server.
A DHCP client's IP address has expired.
The DHCP server assigned an IP address to a client.
Someone has logged on to the NWA's SMT interface.
Someone has failed to log on to the NWA's SMT interface.
Someone has logged on to the NWA's web configurator
interface.
Someone has failed to log on to the NWA's web
configurator interface.
Someone has logged on to the NWA via telnet.
Someone has failed to log on to the NWA via telnet.
Someone has logged on to the NWA via FTP.
Someone has failed to log on to the NWA via FTP.
CODE DESCRIPTION
Echo Reply
Echo reply message
0
Destination Unreachable
Net unreachable
0
Host unreachable
1
Protocol unreachable
2
Port unreachable
3
A packet that needed fragmentation was dropped because it was set to
4
Don't Fragment (DF)
Source route failed
5
Source Quench
NWA-3500/NWA-3550 User's Guide