Video Problems; Miscellaneous Problems - Fujitsu Stylistic Q702 User Manual

Problem

Video Problems

The display is blank when
you turn on your Hybrid Tab-
let.
The Hybrid Tablet turned on
with a series of beeps and
the display is blank.
The display goes blank by
itself after you have been
using it.
The display has bright or
dark spots.

Miscellaneous Problems

Error message displayed on
the screen during operation
of an application.
Possible Cause
Power management timeouts
are set for short intervals and
you didn't see the display go on
and off again.
Power On Self Test detected a
failure which does not allow the
display to operate.
Power management timeouts
are set for short intervals and
you failed to notice the display
come on and go off again.
The Hybrid Tablet has gone into
Sleep or Hibernate mode
because you have not used it for
a period of time.
If the spots are very tiny and few
in number, this is normal for a
large LCD display.
If the spots are numerous or
large enough to interfere with
your operation needs.
Application software often has
its own set of error message dis-
plays.
Possible Solutions
Move the mouse to restore operation. If that fails, push the Power/Suspend/Resume
switch. (The display may be shut off by Sleep mode, Auto Suspend or Video Timeout)
Contact your support representative.
Push the Power/Suspend/Resume switch. (The display may be shut off by Sleep Mode,
Auto Suspend or Video Timeout)
Push Power/Suspend/Resume switch. Check power management settings, or close
applications and go to the Power Savings menu of the setup utility to adjust timeout
values
See "BIOS Setup Utility" on page 39.
to suit your needs.
This is normal; do nothing.
Display is faulty; contact your support representative.
See your application manual and help displays screens for more information. Not all
messages are errors some may simply be status.
61 - Troubleshooting