1
screws (4)
2
optical-drive brackets (2)
3
optical drive
Replacing the Optical Drive
1. Follow the instructions in
Before You
2. Place the optical-drive brackets in position.
3. Replace the four screws (two on each side) that secure the optical-drive brackets to the optical drive.
4. Place the optical drive on the palm-rest assembly.
5. Replace the four screws that secure the optical drive to the palm-rest assembly.
6. Replace the coin-cell battery (see
7. Replace the battery (see
Replacing the
8. Replace the base cover (see
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
Replacing the Coin-Cell
Battery).
Battery).
Replacing the Base
Cover).