1
hard-drive assembly
3
hard-drive cable connector
7. Remove the four screws that secure the hard-drive bracket to the hard drive.
8. Lift the hard-drive bracket off the hard drive.
1
screws (4)
3
hard-drive bracket
Replacing the Hard Drive
1. Follow the instructions in
Before You
2. Remove the new hard drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
3. Place the hard-drive bracket on the hard drive.
4. Replace the four screws that secure the hard-drive bracket to the hard drive.
5. Connect the hard-drive cable to the hard drive.
6. Place the hard-drive assembly on the palm-rest assembly.
7. Replace the four screws that secure the hard-drive assembly to the palm- rest assembly.
8. Replace the battery (see
Replacing the
2
screws (4)
2
hard drive
Begin.
Battery).