Download Print this page

Dell Vostro V13 Service Manual: Removing The Heat Sink And Fan Assembly; Replacing The Heat Sink And Fan Assembly

Hide thumbs

Advertisement

Back to Contents Page
Heat Sink and Fan Assembly
Dell™ Vostro™ V13 Service Manual
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Heat Sink and Fan Assembly

NOTE:
You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in
Before Working Inside Your
2. Remove the ExpressCard, if applicable.
3. Remove the
SD
card, if applicable.
4. Remove the
base
cover.
5. Remove the battery.
6. Remove the
hard drive and audio
7. Remove the
WLAN
card.
8. Remove the
LCD
cover.
9. Remove the memory.
10. Remove the keyboard.
11. Remove the
card
reader.
12. Remove the
coin-cell
battery.
13. Remove the
system
board.
14. Disconnect the fan cable from the system board.
15. Remove the screws that secure the heat sink and fan assembly to the system board.
16. Lift the heat sink and fan assembly up and away from the system board.

Replacing the Heat Sink and Fan Assembly

To replace the heat sink and fan assembly, perform the above steps in reverse order.
Back to Contents Page
Computer.
board.

Advertisement

   Also See for Dell Vostro V13

   Related Manuals for Dell Vostro V13

Comments to this Manuals

Symbols: 0
Latest comments: