Programming After Replacing The Electronic; Electronic Modes - Miele G600 User Manual

Technical Information
4.25.1

Programming After Replacing the Electronic

In addition to Intake Duration and Water Softener Settings certain
dishwasher Electronics need to be programmed for the width of the
dishwasher (45 cm or 60 cm).
For further information refer to the model specific programming and
service mode(s) information.
4.25.2

Electronic Modes

The electronic modes are divided into 3 levels:
The Programming Mode
Service Mode 1
Service Mode 2
The Programming Mode is intended for user access. Service Mode 1
and Service Mode 2 are designed to be accessed only by qualified
service personnel.
Note - While in Service or Programming Modes...
If the dishwasher is switched off; or the door is opened the dishwas
her automatically exits the current mode and returns to the
operational mode.
G600 & G800 Electronic Dishwashers
56