Clearing Titles; Entering Titles - Clarion DXZ838RMP Owner's Manual

Operations Common to Each Mode
7. If you failed, repeat steps 3 to 6.
Note:
• When installing this device or transferring it into
another vehicle, for the sake of safety, always
have this work done by the store of purchase or
your nearest Clarion dealer. Installation requires
specialized techniques and experience.
Setting auto volume sensitivity
1. Press and hold the [T] button for 1 second or
longer and enter "ADJ" mode
2. Press the [a] or [d] button to select the
"A-VOL SENS"
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to make the adjustment.
The adjustment steps are below 6 steps, Off
➜ Low ➜ M-L ➜ Mid ➜ M-H ➜ High.

Entering titles

Titles up to 8 characters long can be stored in
memory and displayed for CD, CD changer and
TV stations. The number of titles that can be en-
tered for each mode are as follows.
Mode
CD mode
TV mode
TUNER mode
CD changer mode
DCZ625 connected
CDC655Tz connected
CDC1255z connected
1. Press the [FNC] button to select the mode
you want to enter a title (CD, CD changer or
TV).
2. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
enter the title.
3. Press the [D] button and display the main.
4. Press the [T] button.
5. Press the [a] or [d] button to move the
cursor.
6. Press the [D] button to select a character.
Each time you press the [D] button, the char-
acter changes in the following order:
Capital letters ➜ Small letters ➜ Numbers/
Symbols ➜ Umlaut ➜ Capital letters...
7. Turn the [ROTARY] knob to select the de-
sired character.
28
DXZ838RMP
Number of titles
50 titles
20 titles
30 titles
Number of titles
100 titles
100 titles
50 titles
8. Repeat steps 5 to 7 to enter up to 8 charac-
ters for the title.
9. Press and hold the [
onds or longer to store the title into memory
and cancel title input mode.

Clearing titles

1. Select and play a CD in the CD changer or
tune in to a TV station for which you want to
clear the title.
2. Press the [D] button and display the main.
3. Press the [T] button and switch the display to
the title input display.
4. Press the [BND] button.
5. Press and hold the [
ond or longer to clear the title and cancel title
input mode.
] button for 2 sec-
] button for 2 sec-