Saving A Point On The Map As A Waypoint - Garmin 3600 Application Manual

™
iQue 3600
GPS Applications
Using Waypoints
Waypoint Details Page with Route Shown
22
To save a point on the map as a waypoint:
Waypoint
Marked on the
Map Page
New
Waypoint
Window
To view a waypoint on the map:
1. With the Map displayed, use the stylus to tap a desired loca-
tion on the map which causes the map pointer to display. If
the point on the map where you tapped has descriptive information
in the map database, it displays for six seconds.
2. Once the map pointer is at the desired location, tap the Waypoint
icon at the bottom of the map to display the "New Waypoint"
window.
3. Observe that the "New Waypoint" window has named the location
as an address, intersection, or named map item if supported by data
in the map database. If not supported, it names the location as
Waypoint 1, 2,3, etc.
4. You can use the Graffi ti ® 2 input area to rename the waypoint.
5. If the point on the map is an address, checking the "Include Address
Data" option will copy the address information to the new waypoint.
6. To save the waypoint to the Address Book, tap OK.
1. From the Address Book application use one the following procedures:
• Tap either the Flag icon or the Location button from the
"Address View" form.
• Tap the Flag icon at the right side of the waypoint entry on the
list view.
2. From QueFind, Find Waypoints, highlight a waypoint in the list, and
tap the Details button.