Messages - Garmin GPSMAP 276C Owner's Manual

Appendix
Approaching Turn: You are nearing a turn in a route.
Arriving at Destination: You are nearing your destination.

Messages

Batteries Low: The unit has less than 10 minutes of battery left.
Cannot display all found, use city or postal code: The unit found too many items to display. Narrow
the search using the city or postal code.
Cant Unlock Maps: No applicable unlock code for one or more maps was found. All MapSource map
are not accessible.
Database Error: Internal problem with the unit. Contact your dealer or Garmin Customer Service to
have the unit repaired.
Deep Water: The water is deeper than the amount set in the Deep Water Alarm.
Dragging Anchor: The distance set in the Anchor Alarm is exceeded.
Lost Satellite Reception: The unit is unable to continue receiving satellite signals.
Memory Full: Unit memory is full, no further data can be saved.
Near Proximity Point: You have reached the distance set for a proximity waypoint.
No Diff GPS Location: RTCM is selected but the unit is not receiving DGPS data.
None Found: No data matched the search criteria.
No Tide Stations for that Area: No tide stations within 100 miles of the area.
Off Course: You are off course the distance set in the 'Off Course' Alarm.
Proximity Memory Full: No additional proximity waypoints can be saved.
Proximity Radius Overlaps: The radius of two proximity waypoints overlap.
Route Already Exists: You have entered a route name that already exists.
Route Memory Full: No additional routes can be saved.
99