Wiring Connection - Kenwood KDC-4051UM Instruction Manual

Wiring connection

KDC-U449
Front output terminals
Rear/subwoofer output terminals
Light blue/yellow
(Steering remote control wire)
Brown
(Mute control wire)
White ª / White/black · : To front speaker (left)
Gray ª / Gray/black · : To front speaker (right)
Green ª / Green/black · : To rear speaker (left)
Purple ª / Purple/black · : To rear speaker (right)
Blue
(Motor antenna control wire)
Blue/White
(Power control wire)
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
Blue/White
(Power control/motor antenna
control wire)
Red (A7)
Yellow (A4)
ISO connectors (page 18)
KDC-U449/
Antenna terminal
KDC-U3049/
KDC-U349
KDC-4051UM
KDC-U449/ KDC-U3049/ KDC-U349
To the antenna control terminal in the vehicle.
To the power control terminal when using the optional power
amplifier.
To the metallic body or chassis of the car
KDC-U3049/ KDC-U349/ KDC-4051UM
Rear/subwoofer output terminals
(JASO)
Except for KDC-U3049: To the steering wheel remote control
adapter (optional accessory)
To the terminal that is grounded when either the telephone rings
or during conversation. (To connect the Kenwood navigation
system, consult your navigation manual.)
Car fuse box
KDC-4051UM
To the power control terminal when using the optional power
amplifier, or to the antenna control terminal in the vehicle.
Red (Ignition wire)
Yellow (Battery wire)
See also "Connecting the ISO connectors on some
VW/Audi or Opel (Vauxhall) automobiles" on
page 18.
Fuse (10 A)
Ignition key switch
Car fuse box
Battery
17