Table of Contents
Advertisement
Quick Links
SYMBOLS USED ON THE RECEIVER .......................................................................... 3
SAFETY INSTRUCTIONS .............................................................................................. 4
I.GENERAL INFORMATION ........................................................................................... 5
1. Preface ................................................................................................................. 5
2. Main Features ...................................................................................................... 5
3. General Operation of the Receiver....................................................................... 6
4. Front Panel .......................................................................................................... 7
5. Rear Panel ........................................................................................................... 8
6. Remote Control Unit ............................................................................................. 9
7. Installation of STB ............................................................................................... 11
7.1 Connecting to a Television ......................................................................... 11
7.2 Connecting to TV using YPbPr support ..................................................... 12
7.3 Connecting to another receiver ................................................................. 12
II. MENU STRUCTURE................................................................................................. 13
1. Program List ....................................................................................................... 14
1.1 TV Program List ........................................................................................ 14
1.2 Music Program List ................................................................................... 15
1.3 Sort ........................................................................................................... 15
2. Program Search ................................................................................................. 15
2.1 Automatic Search ...................................................................................... 15
2.2 Manual search .......................................................................................... 16
3. Parental Control ................................................................................................. 16
3.1 Channel Lock ............................................................................................ 16
3.2 Parental Setting ........................................................................................ 16
3.3 Change PIN .............................................................................................. 17
4. System Setting ................................................................................................... 17
4.1 Video Setup .............................................................................................. 17
4.2 Advanced Setting ...................................................................................... 17
Table of Contents
1
Advertisement
Table of Contents
Related Manuals for Wintal STB1SD
Summary of Contents for Wintal STB1SD
-
Page 1: Table Of Contents
Table of Contents SYMBOLS USED ON THE RECEIVER ................3 SAFETY INSTRUCTIONS ....................4 I.GENERAL INFORMATION ................... 5 1. Preface ......................... 5 2. Main Features ...................... 5 3. General Operation of the Receiver............... 6 4. Front Panel ......................7 5. Rear Panel ......................8 6. - Page 2 4.3 Language ....................18 4.4 Time Setting ....................18 4.5 System Schedule ..................18 5. Accessory ......................19 5.1 System Information ................... 19 5.2 Factory Default ..................19 5.3 System update ..................19 6. Shortcut Key Functions ..................20 6.1 Electronic Program Guide (EPG) .............. 20 6.2 Program List ....................
-
Page 3: Symbols Used On The Receiver
SYMBOLS USED ON THE RECEIVER The next paragraphs explain the meaning of the symbols, present on the receiver. The Digital Video Broadcasting logo. A broadcast standard for digital radio and television using MEPG-2 compression. The caution risk of electrical shock - do not open symbol This symbol tells you that you are not allowed to open the receiver. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS Please read these safety instructions through carefully, before operating the receiver. Please observe all warnings and instructions on the equipment and contained in these operating instructions. Be sure to read this user’s manual before starting your operation. Never open the cover. It is very dangerous to touch the inside of the unit due to possible electric shock. -
Page 5: I.general Information
I.GENERAL INFORMATION 1. Preface The Set top Box is a high cost-effective digital receiver. It is fully compliant with MPEG-2 and DVB-T standards. It provides the enhanced OSD Multi-language menu. Equipped with the latest technology and design, the receiver is ensured to offer high reliable performance for your digital life. -
Page 6: General Operation Of The Receiver
PAL/ NTSC/SECAM supported Automatic power on/off supported Logical channel number (LCN) Supported Signal level & quality indicator Standby with low consumption Time adjustment Antenna Feed 5V Supported 3. General Operation of the Receiver The everyday operation of your receiver is accessed via user friendly on screen displays and menus. -
Page 7: Front Panel
4. Front Panel Press to switch between operation and standby modes MENU: Show the Main Menu and command box on the screen Execute the selected item in the menu When watching, change to the previous or next channel, or move to the next higher or lower item in the menu. -
Page 8: Rear Panel
5. Rear Panel RS232: Connect to a PC for software upgrade * for servicing purposes only ANT IN: Connect to a terrestrial antenna LOOP OUT: Connect to another receiver (RF loop through output from digital tuner) YPbPR: Component video output. Supports high definition output L/R AUDIO: This socket outputs analog audio L/R signal. -
Page 9: Remote Control Unit
6. Remote Control Unit... - Page 10 Press to switch between Operation and Standby modes Press to temporarily cut off the sound 0-9 : Enter required numbers in the input box or select a channel to watch RECALL: Press to switch back to previous channel INFO : Show information of the current channel MENU : Display the Main Menu on the screen...
-
Page 11: Installation Of Stb
7. Installation of STB This section explains the installation of the receiver. Refer to the manuals supplied with the equipment for the installation of outdoor equipment such as the dish antenna. When adding new equipment, be sure to refer to the related parts of the manual for the installation. -
Page 12: Connecting To Tv Using Ypbpr Support
7.2 Connecting to TV using YPbPr support 7.3 Connecting to another receiver NOTE: This connection figure is for reference only. Connectors on the rear panel may be in different places or even be omitted due to different STB models. -
Page 13: Menu Structure
II. MENU STRUCTURE Open the main menu by pressing the MENU button. Program List TV Program List Music Program List Sort Program Search Automatic Search Manual Search Parental Control Channel Lock Parental Setting ... -
Page 14: Program List
1. Program List 1.1 TV Program List From the menu” TV Program List”, the user can rename, sort, lock and add channels to favorite. Select the list you want to modify, the TV-list and press the “OK” button. Favorite Move the selector to the “Favor”-column. -
Page 15: Music Program List
1.2 Music Program List This has the same operation as the 1.1 TV Program List. Please refer to point 1.1 above. 1.3 Sort The channels can be sorted in alphabetical order, by channel number or channel ID. The channel ID is assigned to each channel according to the broadcast information. -
Page 16: Manual Search
2.2 Manual search It’s possible to search for single transponders with the ”Manual Search”. Select the pre-defined channel no. with the desired parameters for the search. If the frequency of the selected channel is receiving a signal, the signal indication-bars will clearly indicate a per-centual signal strength and quality. -
Page 17: Change Pin
In this menu, move the cursor to the channel which you want to lock, and press OK, the locking mark will be display on the selected channel name. If you want to cancel the operation, press OK key again on the selected channel. NOTE: Unless you enter the correct password, you can not watch the locked channel. -
Page 18: Language
4.3 Language Select the menu language, and the default settings for audio and subtitling. 4.4 Time Setting In order to display the local time correctly, it may be necessary to set a time offset indicating the difference between local time and GMT. When GMT-time is active, the time information is received from the broadcast and adjusted according to the selected time zone. -
Page 19: Accessory
End Time: Enter the end time by using the numeric key on the RCU. Channel No.: Select the desired channel No. After setting well, press OK to finish. The task can be set to inactive or active by using keys in the schedule. 5. -
Page 20: Shortcut Key Functions
Power on the slave STB, the upgrade will start automatically, 6. Power off the two STBS. 6. Plug off the 'RS232 serial cable'. 7. Now reset the STB and enjoy the fantastic DTV programs. 6. Shortcut Key Functions The basic TV and Radio functions of your receiver are described below: 6.1 Electronic Program Guide (EPG) In normal view mode, press GUIDE key on the RCU to get into EPG Info. -
Page 21: Audio Select
6.3 Audio Select Should a particular program be available in more than one language, under the non-menu mode, pressing AUDIO key on the RCU will display Audio Select menu. Keys are used to switch among the preprogrammed options. 6.4 Volume Audio Volume can be adjusted using on the RCU, for TV or Radio services. -
Page 22: Technical Specification
III. TECHNICAL SPECIFICATION TUNER Input frequency 174 ~ 860MHz UHF & VHF Bandwidth 7MHz or 8 MHz Input level -72 ~ -20 dBm Input impedance 75Ω DEMODULATION Demodulation QPSK, 16QAM, 64QAM 1/2, 2/3, 3/4, 5/6, 7/8 Mode 2K, 8K Guard 1/4, 1/8, 1/16, 1/32 DEMULTIPLEXER Standard... - Page 23 Output mode Mono, Dual-channel, Stereo Sample frequency 32, 44.1, 48KHz AV OUTPUT Video de-emphasis CCIR REC.405-1, 625LINES Video bandwidth 5.5MHz Video output impedance 75Ω Video output level 1.0Vp-p Audio output frequency 20Hz~ 20KHz Audio output Impedance POWER Input voltage 100-240~ Power consumption 15W max AMBIENT...
-
Page 24: Trouble Shooting
IV. TROUBLE SHOOTING Note : If you cannot solve the problem by referring to the above trouble shooting, please contact your re-seller. Problem Possible Causes What To Do The display on the Main cable is not connected. Check that the main cable is front panel does not plugged into power socket.