Related Manuals for Wintal STB18HD
Summary of Contents for Wintal STB18HD
- Page 1 User Manual High Definition Digital Set Top Box With Recording Via USB STB18HD Please read this User Manual carefully to ensure proper use of this product and keep this manual for future reference.
- Page 2 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, install in accordance with the This symbol indicates that dangerous voltages constituting a risk of instructions.
-
Page 3: Table Of Contents
Front and Rear Panel Table of Contents 1. Front panel Front and Rear Panel................1 Remote Control..................2 Connecting to a Television..............3 Connecting to a DVD Recorder or VCR............3 Connecting to an Audio System..............4 POWER BUTTON: Used to turn on/off the main power supply. 2 STANDBY INDICATOR: Used to visually show power state of the set top First Time Installation.................4-5 box, the LED will turn red if the set top box enter standby mode. -
Page 4: Remote Control
Remote Control 22. REP/ REC: Selects Repeat or turns off Repeat mode; Used to record the program. 1. MUTE: Mute or Restore Audio Output. 23. PLAY/PAUSE: Starts or resumes media playback; Pauses media playback. 2. STANDBY: Switch the product to on or standby. 3. -
Page 5: Connecting To A Television
Connecting to a Television Connecting to a DVD Recorder or VCR For a basic connection from this Set Top Box to your television, use the TV Antenna Composite video connection outlined below. For a higher quality connection, use the Component Video connection outlined below combined with the L/R Audio outputs. -
Page 6: Connecting To An Audio System
Connecting to an Audio System First Time Installation Getting Started : Once you have connected this Set Top Box (STB) to the appropriate video and audio input sockets on your TV, and have selected the matching inputs on the 100-240V~ 50/60Hz TV to receive these signals, you will need to be comfortable with selecting several basic operations before setting up your Set Top Box for the first time. -
Page 7: Menu Settings
By default, the Installation Guide will be locked to English as the On-Screen Display (OSD) language. Use the DOWN cursor key on the Remote Control to select the Country entry line (which should be pre-set to AUSTRALIA), and then use the DOWN cursor key to select the Channel Search line. Press OK to start the channel tuning process and display a Channel Search progress screen. -
Page 8: Electronic Program Guide (Epg)
Move a TV or Radio Program [Service Name] - Sorts the channels according to the station 1. Select the preferred program then press the RED button. A move symbol [Service ID] - Sorts the channels by station ID. will appear 2. - Page 9 (7) Channel Search 2. Press the RIGHT/LEFT key to select the channel frequency 3. Press OK to start searching channels To access the menu, press MENU select [Channel Search ]. The If a channel is found, it is saved and added to the channels list. If channels provides options to adjust the earch hannel settings.
- Page 10 (2) Set Password Set or change the password for locked programs. Enter your old password or the default password '000000'. You will then be asked to enter your new password. To confirm, re-enter your new password again. Once it is confirmed, press EXIT to exit the Menu. (3) Restore Factory Default Resets your Set Top Box to the Default Factory Settings.
-
Page 11: Usb Personal Video Recorder (Pvr)
To access the Menu, press the MENU button and select [USB] using the Note: RIGHT/LEFT keys. The menu provides options to playback Music, Photo - We cannot guarantee compatibility (operation and/or bus power) with all and Multimedia files. It can support off-air DTV recordings made by this unit, as USB mass storage devices and assume no responsibility for any loss of well as various low data-rate AVI, MPEG4, MP3, JPEG and BMP format files. - Page 12 Data Rates: Australia: About 2GB/hr for SD broadcasts and about 4GB/hr for HD A list of the recorded files will appear in the following format : broadcasts, although this can vary depending on the broadcaster. {TV Channel name} {Month/Day/Year} {Start time of Recording} {Program name}.mts RECORDING : The ".mts"...
- Page 13 TIMER FUNCTIONS: simultaneously recording the rest of the program. If you allow at least 15 This device can carry out “Scheduled” recordings, similar to the timer record minutes before pressing “Play” you will be able to Fast Forward through function in a VCR or DVD recorder. As well as allowing the user to manually undesired parts of the program.
-
Page 14: Troubleshooting
Technical Specifications Troubleshooting Item Sub Item Parameter Problem Potential Reasons What to do No picture Power isn't connected Connect the power Tuner Input Frequency 177.5MHz~226.5MHz The power switch is not on Switch on the power 522.5MHz~830.5MHz Check antenna cable and Antenna not connected Screen shows RF Input level...