Booster Function - Miele KM 5773 Operating And Installation Manual

Using the cooktop

Booster function

All burners are equipped with a booster
function. If the booster function (a
power boost) is selected, the burners
will operate for 10 minutes on the
highest power level (12). The booster
function is designed to boil large
volumes of water quickly, e.g. to cook
pasta. Two booster functions can be
used at the same time.
If the cookware is removed during
auto-heat, the auto-heat phase will be
interrupted. It will be continued, when
the cookware is replaced on the burner
(within 3 minutes).
The booster power can only be
provided, by taking power from other
burners during the booster time.
Therefore two burners are networked as
shown:
22
Turning the booster on causes:
– a selected auto-heat on the
networked burners to be turned off.
– The power level of the related burner
will be reduced. The selected and
the reduced power level flash
alternately until the booster function
has turned off. The reduced power
level is also shown by the number of
segments in the lighting cycle.
Turning the booster on
^ Touch the sensor B of the respective
burner.
The burner display shows power level
12 and the booster indicator lights.
After 10 minutes the power level will
automatically reduced to power back to
level 12 again.
To turn off the booster ahead of time
^ Touch the sensor B or - of the
respective burner.
If a power level is selected first and the
booster is selected second. The power
level will then be reduced to the
selected power level.