Introduction; Front View - Denver LED-2251DVBT Instruction Manual

Introduction

1. Front View

1. (IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby)LED Indicator: Press POWER to turn on and off.
Indicator on(Red)
Indicator on(Null)
The effective receiving range for the signal is 5-8 metres from the front of the remote
control window, and 30
window.
2. The functions of the buttons:
MENU : Press to display the OSD menu, press again to exit the menu.
CH+/- : Press to scan through channels.
VOL+/- : Press to adjust the volume.
INPUT : Press to display the input source menu.
POWER : Turn on/standby the TV set.
Introduction
Standby mode
Power on mode
0
to the left or right side and 20
Led Indicator
Remote Control window(Keep clear)
0
above or below the remote control
4