Page 1
TFD-1906DVBT AC/DC 19 TFT LCD TV+DVD COMBO/DVBT " Operating Instructions PAL/SECAM B/G,D/K, I AC 110-240V 50/60Hz SCART IN, PC IN TELETEXT NTSC PLAYBACK INSIDE DVD SUPPORT FORMAT: SVCD, VCD, WMA, HDCD, KODAK PICTURE CD, DVD MPEG4...
TABLE OF CONTENTS Table of Contents Inital Settings(DVD) 20-21 DVBT Setup Menu Setting Specifications 22-25 Troubleshooting Tips Installation The Causes of interference Important Safety Instruction Warnings and Cautions Setup Functional Parts(TV) Functional Parts(DVD) Rear view of TV set 12-13 Remote Control unit TELETEXT Operations Remote Control Operation(DVD) 15-16...
INSTALLATION Thank you very much for your purchase of this product, the most natural Colour Television Receiver. To enjoy your set to the full from the very beginning, read this manual carefully and keep it handy for ready reference. INSTALLATION Locate the receiver in the room where direct light does not strike the screen.
IMPORTANT SAFETY INSTRUCTION WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lighting flash with arrow head within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
WARNINGS AND CAUTIONS Caution Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver. Caution Do not insert anything in the ventilation holes. If metal or something flammable enters, it may result in fire or electric shock. Caution Do not place objects on this unit, it may damage the screen surface.
Page 8
WARNINGS AND CAUTIONS Caution Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it should fall. Caution Do not place your television on an unstable cart , stand , shelf or table.
Page 9
WARNINGS AND CAUTIONS Warning Take care not to connect many appliances to the same mains socket as this could result in fire or electric shock. Warning High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.
¼ò ½é ¼ò ½é SETUP Remote Control Battery Installation Requires two AAA batteries(supplied). Procedure 1. Turn the remote control face down. Remove battery cover by pressing down on the marking on the cover and sliding it off in the direction indicated. 2.
FUNCTIONAL PARTS(TV) Front View of LCD Set MENU TV/DVD STANDBY 1. LED indicator lamp 2. Remote Sensor 3. Standby Button TV/DVD Button 5. MENU Button 6. P+ Button 7. P- Button 8. V+Button 9. V- Button To turn the TV power ON Put the TV set on the correct place, then connect the DC plug of the AC-DC adaptor to the DC 12V socket at the back of the TV set.
FUNCTIONAL PARTS(DVD) 1. DVD Slot 2. Open/Close 3. Stop 4. Play/Pause 5. Preview 6. Next 7. Repeat Switch this LCD-TV Set to DVD status, insert the disk to DVD slot, and the player will suck it in. Notes: 1.Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. 2.Do not use irregularly shaped CDs (e.g., Heartshaped or octagonal)since they may result in malfunctions.
REAR VIEW OF TV SET DC IN 12V HEADPHONE PC IN FULL-SCART RF INPUT(ANT.) TO DC IN 12V TO POWER SOURCE NOTE Precautions when connecting to other equipment When using external equipment with this TV set, please read the instruction manual of the external equipment. Switch off all power supplies to the equipment and TV set before connection.
REMOTE CONTROL UNIT POWER ON/STANDBY button Press this button to switch on the TV when at standby mode or enter OPEN/CLOSE POWER standby mode. MUTE button Press this button to mute or restore sound. P. P P. P P. P P.
Page 15
REMOTE CONTROL UNIT MENU Button Press this button to enter the menu screens for various optional OPEN/CLOSE POWER adjustable settings. PROG+/- Button Press the program up button to select the program forwards. Press P. P P. P the program Down button to select the program Backwards. VOL+/- Button Press volume up/down buttons to adjust sound level.
TELETEXT OPERATIONS For models with Teletext function only. TEXT Button OPEN/CLOSE POWER Press this button to enter or exit the teletext mode. INDEX Button Press the button to go to the index page. P. P P. P REVEAL Button Press this button to reveal the hidden information for some Teletext pages(e.g.
REMOTE CONTROL OPERATION(DVD) DVD Mode: OPEN/CLOSE POWER POWER Press this button to switch television on or off. OPEN/CLOSE Button P. P P. P Press OPEN/CLOSE button to load disc on disc tray. Hold the disc without touching either of its surfaces, position it with the printed title side facing up, align it with the guides, and place it in its proper position.
Page 18
REMOTE CONTROL OPERATION(DVD) DVD Mode: OPEN/CLOSE POWER REPEAT Button To press this button you can repeatedly play a title(DVD) or all ¡±appears on TV screen, you can tracks(CD) when¡°ALL repeatedly play a chapter (DVD) or a single track(CD) when¡°Repeat P. P P.
REMOTE CONTROL UNIT (DVB-T) DVB-T Mode: OPEN/CLOSE POWER FORMAT: used to change the TV picture aspect SUB.T(SUBTITLE): used to switch subtitles on or off P. P P. P INFO: used to display information for the channel being viewed RECALL: reverts to previous channel EXIT: used to return to TV DVBT-MENU: used to open and close the menu windows -/--...
MENU SCREENS This TV allows you to adjust any setting from the menu screens using ¡°MENU¡±,¡°VOL+/-¡±and ¡°PROG+/-¡± buttons. Press ¡°MENU¡±button to display the menu, press¡°PROG+/-¡±to change menu from one to another, ¡°VOL+/-¡± to enter the chosen menu, press¡°PROG+/-¡±to select the item, and then press ¡°VOL+/-¡±to adjust each item.
Page 21
MENU SCREENS SETUP MENU SETUP BULE SCREEN: You can set background ON or OFF. TXT LANGUAGE. BLUE SCREEN ASPECT: You can set the picture display mode 16:9, 4:3 ,ZOOM1,and ZOOM2,PANORAMA. TXT LANGUAGE WEST ASPECT 16:9 ADJUST SELECT EXIT OSD MENU You can choose the language, adjust the H-position, LANGUAGE ENGLISH...
INITAL SETTINGS(DVD) COMMON PROCEDURES OF INITIAL SETTINGS AUDIO SETUP PAGE Dolby General Audio Video Preference Press SETUP button to get the setup menu. Use Speaker Setup Page direction buttons " " to select the preferred item . Downmix Stereo LT/RT After finishing settings, press SETUP again to TV Stereo display.
Page 23
INITAL SETTINGS(DVD) PREFERENCE SETUP PAGE Dolby General Audio Video Preference Preference Page Audio English Subtitle French English Disc Menu English Spanish French French Chinese Spanish Parental Spanish Japanese Chinese Password Chinese Korean Japanese Change 3 Pg Default Japanese Russian Korean 4 Pg 13 Reset Korean...
DVBT SETUP MENU SETTING General Operation&General Setup Page First Time Installation No channels are stored in your unit. A First Time Installation Wizard will appear automatically on the screen. Continue with the OSD (On-Screen-Display) to do the following setting. 1 A First Time Installation Wizard appears. Press ¡°ENTER¡± to select ¡°YES¡±. 2 Press ¡°UP¡±...
Page 25
DVBT SETUP MENU SETTING General Setup Page The following is the overview of the seven settings: Program List Program Search TV Program List Automatic Search Music Program List Manual Search Sort System Setting Enter parental PIN TV standard Display TYPE Enter PIN Video output Antenna power...
Page 26
DVBT SETUP MENU SETTING Speaker Setup Page Program Search To Enjoy the high quality of digital TV signals through the Set Top Box, you have to search for all the available TV program first. This unit provides you with 2 ways of program search, including Automatic Search and Manual Search Automatic Search 1 Under Main Menu, press ¡°DOWN¡±...
Page 27
DVBT SETUP MENU SETTING Dolby Digital Setup System Setting This function allows you to set up the normal aspect ratio (picture display shape) according to source signal and monitor format of your TV, or your own viewing preference. Regional Settings This function allows you to set the time zone of your location and corresponding bandwidth of the digtial signals all at once simply by selecting the country you are currently in.
TROUBLESHOOTING TIPS Before calling for service, you can check the following items on symptoms and solutions. No picture: Check other channel, maybe station problem. Adjust the tuning control. Ensure that the input setting is at TV state. Ensure that the LCD is on. Ensure that the equipment is connected properly.
THE CAUSES OF INTERFERENCE Incorporated in your TV receiver are the most up-to-date devices to eliminate interference.Local radiation however, can create disturbances which visibly affect your picture. Proper installation, a good aerial are your best safe-guards against these disturbances. RF INTERFERENCE Moving ripples across the screen are caused by nearby transmitting or receiving short-wave radio equipment.