Denver LED-2251DVBT Instruction Manual page 16

FAV,SKIP,LOCK: Select the desired channel with ∧ / ∨ button, and operate with GREEN,
YELLOW, BLUE buttons, press the color button again to cancel the operation.
FAV: Press GREEN button on the remote control to set the channel as favorite channel.
SKIP: Press YELLOW button on the remote control to skip the channel.
The channel that is skipped can not be programed when you scan channels with CH+/-
button.
LOCK: Press BLUE button on the remote control to lock the channel.
You have to enter the password to program the channel that is locked.
MOVE: Exchange the position of the channel.
Select the channel, and press > button to move,(there will be an arrow after the channel
name, you could cancel the operation by pressing OK button or select another channel and
press > button)
Then select the channel you want to be change to, and press OK button to exchange.
NAME: Name the channel.
Select the channel, and press OK button to enter the EDIT NAME menu.
Select character 's
area by number
button on the remote
control
Empty the
channel name
Name the channel acorrding to the hints of picture above, and select "OK" item, press OK
button to complete.
OSD Menu
EDIT NAME
AB_ _ _ _ _
1 2 3 4 5
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0
a b c d e f g h i j k l m n o p q r s t u v w x y z
1 2 3 4 5 6 7 8 9 0
EMPTY BAK SPC
0 ～ 9 SHORTCUT KEY MOVE
Select the previous
position of the
channel name
6 7 8 9
_ [ ]
OK CANCEL
ENTER BACK
MENU
Cancal the name
Confirm the name
14
Channel name
Select the character by
∧ ∨ < > buttons
on the remote control
and press OK button
to confirm
Hints for operation