LG 32LN5700 Owner's Manual page 47

EXTERNALCONTROLDEVICESETUP 7
* Commands may work differently depending on model and signal.
01. Power (Command: k a)
_- To control Power Off of the set.
* In case of video mute on only, TV will display On
Screen Display(OSD). But, in case of Screen mute
on, TV will not display OSD.
Data 00 : Power Off
_- To Show Power On. (Works TV is On Only)
04. Volume Mute (Command: k e)
_- To control volume mute on/off.
You can also adjust mute using the MUTE button
on remote control.
* Similarly, if other functions transmit 'FF' data
based on this format, Acknowledgement feedback
presents status about each function.
Data O0 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
i i i
02. Aspect Ratio (Command: k c)
(Main Picture Size)
_- To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the Q.MENU. or PICTURE menu.
05. Volume Control (Command: k f)
_- To adjust volume.
You can also adjust volume with the volume
buttons on remote control.
Data 01 : Normal screen
(4:3)
02 : Wide screen
(16:9)
04 : Zoom
05 : Zoom 2
(Latin America
except Colombia
Only)
07 : 14:9
(Europe, Colombia, Mid-East,
Asia except South Korea and
Japan)
09 : * Just Scan
0B : Full Wide
(Europe, Colombia, Mid-
East, Asia except South
Korea and Japan)
06 : Set by Program/10 to IF : Cinema Zoom 1
Original to 16
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In DTV/HDMI/Component mode (high-definition),
Just Scan is available.
* Full wide mode may work differently based on
model and is supported for DTV fully, and AT',/,
AV partially.
03. Screen Mute (Command: k d)
_- To select screen mute on/off.
Data O0 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
Data Min : 00 to Max : 64
06. Contrast (Command: k g)
_- To adjust screen contrast.
You can also adjust contrast in the PICTURE
menu.
Data Min : 00 to Max : 64
07. Brightness (Command: k h)
_- To adjust screen brightness.
You can also adjust brightness in the PICTURE
menu.
Data Min : 00 to Max : 64
08. Color/Colour (Command: k i)
_- To adjust the screen Color(Colour).
You can also adjust colour in the PICTURE menu.
Data Min : 00 to Max : 64