Functions - LG 32LN5700 Owner's Manual

30 MAGIC REMOTE CONTROL FUNCTIONS
MAGIC REMOTE CONTROL FUNCTIONS
When the message "Magic remote control battery is low. Change the battery." is displayed, "'_ 8
replace the battery. To instalt batteries, open the battery cover, replace batteries (1.5 V AA) //_'_
matching _ and (-_ ends to the labet inside the compartment, and close the battery cover. Be _ £X_j_
sure to point the remote control at the remote control sensor on the TV. To remove the batteries, __"
perform the installation actions in reverse.
Do not mix old and new batteries, as this may damage the remote control.
This remote uses infrared light. When in use, it should be pointed in the direction of the TV's remote sensor.
For LN5750 series
@ Wheel
Selects menus or options and confirms
your input.
Scrolls through the saved channels.
If you press the navigation button while
moving the pointer on the screen, the
pointer disappears, and the Magic remote
control works as a regular remote control.
To display the pointer again, shake the
Magic remote control from side to side.
<,% BACK
Returns to the previous screen.
@ Voice recognition
-This is a beta version and only available in
selected functions for supported models.
-Network connection is required to use the
voice recognition function.
1. Press the Voice recognition button.
2. Speak slowly and precisely.
When a voice is recognized, the processing
message appears on the screen.
• Use the magic remote control no further
than 10 cm from your face.
[2_] (User Gide) --
Sees user-guide.
Pointer (RF transmitter)
t_ (POWER)
Turns the TV on or off.
Navigation buttons (up/down/left/right)
Scrolls through menus or options.
Accesses the Smart Home menu.
/Q.MENU
Accesses the Universal Control.
(Depending on country)
Accesses the quick menu.
_ VOL
Adjusts the volume level.
_CHS¢
Scrolls through the saved
channels.
}q_ (MUTE)
Mutes all sounds.