LG 32LN5700 Owner's Manual

Hide thumbs Also See for 32LN5700:

Advertisement

Life's Good
iii _i _ _(i_
i{iii
LED TV
LG LED TV applies
LCD screen with LED backlights.
Please
read
this
manual
carefully
before
operating
your
set
and
retain
it for
future
reference.
32LN5700
39LN5700
42LN5700
47LN5700
50LN5700
55LN5700
60LN5700
32LN570B
47LN5710
50LN5710
55LN5710
60LN5710
47LN5750
50LN5750
55LN5750
60LN5750
47LN5790
55LN5790
P/NO
: MFL67690902
(1303_REV01)
www.lg.com

Advertisement

Table of Contents
loading

Summary of Contents for LG 32LN5700

  • Page 1 _i _ _(i_ i{iii Life's Good LED TV LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your retain it for future reference. 32LN5700 32LN570B 47LN5710 47LN5750 47LN5790 39LN5700 50LN5710 50LN5750 55LN5790...
  • Page 2: Important Safety

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. WARNING/CAUTION Do not use this apparatus near water.
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on CAUTION concerning the Power Cord or pinched particularly at plugs, convenience (Can differ by country): receptacles, and the point where they exit from the It is recommended that appliances be placed upon a apparatus.
  • Page 4 Do not attempt to modify this product in any way the TV, unplug the power cord and contact an without written authorization from LG Electronics. authorized service center. Unauthorized modification could void the user's Keep the product away from direct sunlight.
  • Page 5 IMPORTANT SAFETY INSTRUCTIONS Dot Defect For USA and Canada The Plasma or LCD panel is a high technology product with resolution of two million to six minion pixets. In a very few cases, you could see fine dots on the screen while you're viewing the TV. Those dots are deactivated pixels and do not affect the This equipment has been tested and found to performance...
  • Page 6: Licenses

    LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to 'opensource@lge.com'.
  • Page 7: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS REMOTE CONTROL LICENSES MAGIC REMOTE CONTROL FUNCTIONS OPEN SOURCE SOFTWARE NOTICE Registering Magic Remote Control How to use Magic Remote Control Precautions to Take when Using the Magic TABLE OF CONTENTS Remote Control WATCHING...
  • Page 8: Installation Procedure

    INSTALLATION PROCEDURE / ASSEMBLING PREPARING INSTALLATION PROCEDURE Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. Make sure the network connection is available. You can use the TV network functions only when the network connection is made.
  • Page 9 ASSEMBLING PREPARING (For LN5700, LN570B, LN5710, LN5790 series) (For LN5750 series) iOOOO irnDD IIo tl Owner's Manual Remote Control, Batteries (AAA) Magic Remote Control, (See p. 28) Batteries (AA) (See p. 30) Power Cord Stand Screws Stand Body, Stand Base 3 EA, P5 x 25 (See p.
  • Page 10: Assembling And Preparing

    The model name or design may be changed due to the manufacturer's circumstances or policies. Sound I® ©o ®] AN-MR400 AN-VC4** LG Audio Device Video Call Camera Magic Remote (For LN5710, LN5790 series) AN-WF 100 AN-BL*** Tag On Wireless LAN for Broadband! Wireless IR Blaster...
  • Page 11: Parts And Buttons

    ASSEMBLING PREPARING Parts Buttons ,-Screen Speakers Buttons Power Indicafor Remote confrol Sensor Infelligenf Sensor Description (A /V) Scrolls through the saved channels. +/_=, (+ /_) Adjusts the volume level. (OK ®) Selects the highlighted menu option or confirms an input. (SETTINGS) Accesses the main menus,...
  • Page 12: Lifting And Moving Thetv

    ASSEMBLING PREPARING Lifting moving theTV When moving or lifting the TV, read the following prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. Avoid touching the screen at atl times, as this may oAuT oN result in damage to the screen.
  • Page 13: Setting Up Thetv

    ASSEMBLING PREPARING Setting up theTV The TV can be mounted to a wall or the stand can be attached if the TV will be positioned on an entertainment center stand. Affaching fhe sfand If you are not mounting the TV to a wall, use the following instructions to attach...
  • Page 14: Mounting On A Table

    ASSEMBLING PREPARING Mounting on a table (Depending on model) Lift and tilt the TV into its upright position on a table. The Kensington security system connector is located at the rear of the TV. - Leave a 10 cm (4 inch) (minimum) space from For more information of installation and using, refer...
  • Page 15: Tidying Cables

    ASSEMBLING PREPARING Tidying cables (Depending on model) Gather and bind the cables with the cable holder. ¢,, © ° /0-_ ..Cable holder Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. - If there are bolts inserted at the eye-bolts position, + Do not move the TV by holding the cable holder, remove the bolts first.
  • Page 16: Mounting On A Wall

    47/50/55/60LN5710 ..# 7/50/55/60LN5750 An optional wall mount can be used with your LG 47/55LN5790 Television. Consult with your local dealer for a walt mount that supports the VESA standard used by your VESA (A x B) 400 x 400 TV model.
  • Page 17: Making Connections

    MAKING CONNECTIONS 1"7 MAKING CONNECTIONS This section uses illustrations of the LN5790 series. You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device's connection, refer to the manual provided with each device.
  • Page 18: Connecting To A Hd Receiver

    MAKING CONNECTIONS Connecting to a HD receiver, Player, or VCR Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMi cabte as shown in the following illustration.
  • Page 19: Dvi To Hdmi Connection

    MAKING CONNECTIONS DVI to HDMI Connection Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMt cable as shown in the following illustration. To transmit an audio signal, connect an audio cable. When using the HDMI/DVI cable, Single link is only supported.
  • Page 20: Connecting To A Mobile Phone

    20 MAKING CONNECTIONS Connecting to a mobile phone Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. F---@ NOTE Connect the mobile phone to the HDMI IN 3 (MHL) port to view the phone screen on the TV. This only works for the MHL-enabted phone.
  • Page 21: Component Connection

    MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV, Connect the external device and the TV with a component cable as shown in the following illustration, _- @ NOTE • If cables are installed incorrectly, it could cause the image to display in btack and white or with distorted color.
  • Page 22: Composite Connection

    MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. Check to ensure the cables are matched with the corresponding color connection.
  • Page 23: Connecting To A Pc

    MAKING CONNECTIONS Connecting to a .--@ NOTE • it is recommended to use an HDMi connection for the best image quality. • Depending on the graphics card, DOS mode video may not work if a HDMi to DVi Cable is in use. •...
  • Page 24 MAKING CONNECTIONS Choose HDMI input port to connect, Jt does matter which port use, © (_Not Provided) *Not Provided) AUDIO OUT DVIOUT...
  • Page 25: Connection

    MAKING CONNECTIONS Connecting to an Audio System You may use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cabte as shown in the following illustration.
  • Page 26: Digital Optical Audio Connection

    26 MAKING CONNECTIONS Connecting to a Sound You may use a Sound Bar instead of the built-in speaker. If you use a Sound Bar instead of the built-in speaker, set the TV speaker to off in the user menu. Digital Optical Audio Connection...
  • Page 27: Connecting Headphones

    MAKING CONNECTIONS 2"7 Connecting Headphones You listen to the sound using headphones. NOTE • AUDIO menu options are disabled when headphones are connected. • When changing AV MODE with headphones connected, the change is applied to video but not to audio. •...
  • Page 28: Remote Control

    REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (I .5 V AAA) matching the t_} and (-} ends to the label inside the compartment, and close the battery cover.
  • Page 29 REMOTE CONTROL INFO © Shows information on the current program. SMART I_ Accesses the Smart Home menu. MY APPS Shows the list of Apps. Q.MENU Accesses the quick menu. Navigation buttons (up/down/left/right) Scrolls through menus or options. OK ® Selects menus or options and confirms your input. m BACK Returnstotheprevious level.
  • Page 30: Functions

    MAGIC REMOTE CONTROL FUNCTIONS MAGIC REMOTE CONTROL FUNCTIONS When the message "Magic remote control battery is low. Change the battery." is displayed, "'_ replace the battery. To instalt batteries, open the battery cover, replace batteries (1.5 V AA) //_'_ matching and (-_ ends to the labet inside the compartment,...
  • Page 31: How To Use Magic

    MAGIC REMOTE CONTROL FUNCTIONS Registering Magic Remote Control Magic Remote Control operates by pairing with your TO register autematica/!yl turn the TV on and press the Wheel (OK): Who n registration is completed, the completion message appears on the screen. if registration fails, tur n the TV off and back (wheel}...
  • Page 32: Watching Tv

    WATCHING WATCHING Turning the TV on for first time NOTE Select Home when prompted. Store mode puts the TV in demo mode. When you turn the TV on for the first time, the Initial If you select Store, the any customized settings setting screen appears.
  • Page 33: Using The User Guide

    USINGTHE USER GUIDE USING USER GUIDE User Guide allows you to easily access detailed TV information. Press SMART 0 button to access the Smart Home menu, Select User Guide and press the (D Wheel (OK) button. @ CHANNELSetting i!!ii!i!ii!ili!ii!ii!ii!!i!ii!iiiiii!i!iiiii!iiiiiiiii!i!i!!i!i...
  • Page 34: Specifications

    _ Stor_ Temperature -20- 60 °C iStorag Humidity Less than 85 % 32LN5700 (32LN5700LUH) 32LN570B (32LN570B-UH) 738 x 497 x 207 (turn) 894 x 587 x 236 (ram) With stand 35.1 x 23.1 x 9.2 (inch) 29.0 x 19.5 x 8.1 (inch)
  • Page 35 SPECIFICATIONS OLN5700 (50LN5700-UH) 5oLN571o MODELS 50LN5750 (50LN5750-UH) 1,136 x 727 x 264 (ram) With stand Dimensions (Width x 44.7 x 28.6 x 10.3 (inch) Height x Depth) 1,136 x 673 x 82.1 (mm) Without stand 44.7 x 26.4 x 3.2 (inch) With stand 15.6 kg (34.3 Ibs) Weight...
  • Page 36 36 SPECIFICATIONS Verticam FrequenCy Resolution Horizontal Frequency {kHz) (Hz) Component ports on the 31.469 59.94 720x480 31.50 60.00 44.96 59.94 1280x720 45.00 60.00 Video output ports on DVD p layer 33.72 59.94 33.75 60.00 26.97 23.97 27.000 24.000 1920x1080 33.716 29.976 33.75 30.00...
  • Page 37: External

    SPECIFICATIONS / EXTERNAL CONTROL DEVICE SETUP (For LN5700, LN570B, LN5750 series) IE EE 802.11 a/b/g/n 2400 to 2483.5 Frequency Range 5150 to 5250 Mmz 5725 to 5850 MHz 802.11a: 16.5 dBm 802.11b: 16dBm Output Power (MaxL) 802.11g: 15.5 dBm 802.11n- 2.4GHz: 15.B dgm 802.11n-...
  • Page 38: Power Cord

    MAINTENANCE/TROUBLESHOOTING MAINTENANCE Cleaning Your Clean your TV regularly to keep it at peak performance and to extend the product lifespan. '_oZ_ CAUTION Before Cleaning, turn the power off and disconnect the power cord and allother cables. When the TV is leftunattended or unused for a long time, disconnect the power cord from the wall outletto prevent possible damage...
  • Page 39 Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE • The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed...
  • Page 40 _r enls vis}l wwwJg_com ol caJJ_ 1-800-243-0000 Consulter (Jr£_i 1-888-865-3026 Corr rrerciaJ Ur£_r 1-888-542-2623 CANADA www.lg.com The model and serial number of the TV is located on the back and one side of the TV. Thispoductq_aiifes ENERGY STAR in rise "factory...
  • Page 41 Life's Good i_,il _%_ _ _C¸_'+_¸ R _ • " EXTERNAL CONT DEVICE S£ Please read this manual carefully before operating the set and retain it for future reference, www.lg.corn...
  • Page 42 KEY CODES KEY CODES This feature is not available for all models. Code Function NOte Code Function Note (Hexa) (He×a) Q.Menu R!C Button CH +, PR + R!C Button CH -, PR - R/C Button List, - (ATSC Only) R/C Button Volume + R!C Button List...
  • Page 43: External Control Device Setup

    (TV) (PC) LGTV supports PL2303 chip-based (Vendor ID " 0x0557, Product ID " 0x2008) USB to serial converter which is not made nor provided by LG. It can be purchased from computer stores that carry accessories for IT support professionals.
  • Page 44 EXTERNAL CONTROL DEVICE SETUP RS-232C with RS-232C Cable (Legacy) Phone jack Type , You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. (TV) (PC) This connection can only be used for the following models: 55/47/39LN5450-UA,...
  • Page 45 EXTERNALCONTROLDEVICESETUP Communication Parameters Baud rate : 9600 bps (UART) Stop bit : 1 bit Communication code : ASCII code Data length : 8 bits Parity : None , Use a crossed (reverse) cable. Command reference list DATA , ;OMMAND1 OMMAND2 ( exaa cm "H -'ei...
  • Page 46 EXTERNAL CONTROL DEVICE S ETUP Transmission / Receiving Protocol [Commandl][Command2][ ][Set ID][ ][Data][Cr] [Command 1] First command to control the TV. (j, k, m or x) Second command to control the TV. [Command 2] [Set ID] You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 47 EXTERNALCONTROLDEVICESETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute _- To control Power Off of the set. on, TV will not display OSD.
  • Page 48 EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 14. Color(Colour) Temperature (Command: x u) _- To adjust the screen tint. _- To adjust colour temperature. You can also adjust You can also adjust tint in the PICTURE menu. Color(Colour) Temperature in the PICTURE menu.
  • Page 49 EXTERNALCONTROLDEVICESETUP * Digital Terrestrial/Cable/Satellite Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) [Data 00][Data 01]: Channel Data - 01 : Cable TV (CATV) Data 00 : High Channel data * Digital Terrestrial/Cable Data 01 : Low Channel data - 00 00 ~ 27 OF (Decimal: 0 ~ 9999)
  • Page 50 EXTERNAL CONTROL DEVICE SETUP 20. Control Back Light (Command: m g) [Data Ol][Data 02]: Major Channel Number Data 01: High byte Channel Data For LCD TV / LED TV Data 02: Low byte Channel Data _- To control the back light. - 00 01 ~ 27 OF (Decimal: 1 ~ 9999) [Data 03][Data...
  • Page 51 EXTERNAL CONTROL DEVICE SETUP 22.3D(Command: x t) (only 3D models) 23. Extended 3D(Command: x v) (only 3D models) (Depending on model) (Depending on model) _- To change 3D option for TV. _- To change 3D mode for TV. [Data 00] 3D option Data Structure 00 : 3D Picture Correction [Data00]...
  • Page 52 Life's Good...

Table of Contents